T-Shirt Size Grading and Pre-Bulk Review Checklist
Print this blank worksheet or choose Save as PDF in your browser’s print dialog. Repeat the measurement section for each sample you review.
Copy this worksheet for each style and specification version. All entry fields are intentionally blank. Add the actual sizes and POMs required by your project. A blank means information or review is still outstanding; it does not mean zero, passed or approved. Use “N/A” only with a reason. Do not infer grade increments, tolerances or test results.
Use finished-garment measurements for this worksheet. Keep body measurements or wearer references in a separate fit-reference record. Do not mix body dimensions with the garment targets or actual garment measurements below.
Use the same POM code in sections B, C and D. Match every actual sample to the same specification version, measurement condition and applicable tolerance.
How to use this worksheet
- A: identify the sample, version and current approval status.
- B/C: agree the targets, size progression, measurement methods and tolerances.
- D/E: record measurements and observations for the samples actually reviewed.
- F/G: close changes and record what the approval does and does not cover.
A Project and sample reference
| Field | Entry |
|---|---|
| Style reference | |
| Specification version and date | |
| Base size | |
| Base sample identifier | |
| Base sample approval status and scope | |
| Ordered size range | |
| Fabric reference | |
| Color and finish | |
| Measurement condition or stage | |
| Measurement unit | |
| Measurement method or diagram reference | |
| Separate body measurements or wearer fit-reference record, if used | |
| Samples requested and review scope | |
| Samples received and sample identifiers | |
| Reviewer and review date |
B Target measurements across sizes
Rename the blank size columns and add columns for every ordered size. These are target values from the agreed specification, not measurements taken from a sample. Record detailed measurement methods in section C.
| POM | Measurement | Size ___ | Size ___ | Size ___ | Size ___ | Size ___ |
|---|---|---|---|---|---|---|
| Chest width | ||||||
| Body length | ||||||
| Shoulder width | ||||||
| Sleeve length | ||||||
| Sleeve opening | ||||||
| Hem width | ||||||
| Neck width | ||||||
| Front neck drop | ||||||
| Additional project POM |
Grading rule reference and version: ____________________
Reviewed by and date: ____________________
Unresolved grading questions: ____________________
B2 Adjacent-size grading review
Check each adjacent pair in the ordered size range against the targets in section B and the agreed grading rule version. Add rows for the required pairs and POMs. Record the unit and sign for each agreed increment. Leave unconfirmed increments blank and describe the open question; no standard increment is supplied here.
| From size | To size | POM | Agreed increment (unit/sign) | Checked by and date | Open issue or follow-up |
|---|---|---|---|---|---|
C Measurement methods and tolerances
Duplicate rows as required. State the applicable sizes if the method or tolerance differs. Lower and upper limits refer to permitted deviation from the target, with units and signs stated explicitly. Obtain agreement before using them to assess a sample.
| POM and applicable sizes | Landmarks and method or diagram reference | Flat width or circumference where applicable | Lower deviation limit (unit/sign) | Upper deviation limit (unit/sign) | Agreed by and date |
|---|---|---|---|---|---|
D Actual sample measurements
Copy this section for every physical sample reviewed. Do not fill actual values for samples you have not measured. Calculate deviation as actual minus target, using the same unit and method. Use the POM code to find the matching target in section B and the method and applicable limits in section C. Leave the result open if its target, method or agreed tolerance is missing.
Sample identifier: __________ Size: __________ Color: __________
Specification version: __________ Condition or stage: __________ Unit: __________
Measured by: __________ Date: __________
| POM | Target | Actual | Deviation | Result against agreed limits | Follow-up reference |
|---|---|---|---|---|---|
E Fit finish and decoration review
Reference each actual sample and size. Record observations and supporting evidence; leave unperformed checks open. Record the reason for any item marked N/A.
| Item | Agreed reference or requirement | Sample and size | Observation or evidence | Status and action |
|---|---|---|---|---|
| Body proportions and intended fit | ||||
| Shoulder position and sleeve shape | ||||
| Neckline shape and construction | ||||
| Measurement stage relative to finishing | ||||
| Artwork version and dimensions by size | ||||
| Artwork placement and reference points | ||||
| Label placement | ||||
| Wash or other performance review if required |
Where a performance check is required, record the agreed method, conditions, acceptance criteria, actual results and report reference separately. No test result is supplied by this template.
F Changes and unresolved items
| Item or POM | Affected samples or sizes | Required change or decision | Responsible person | Review due | Evidence reviewed and closure date |
|---|---|---|---|---|---|
G Scope and approval decision
Complete only after the responsible parties have reviewed the relevant evidence. Possible decisions include “Not approved,” “Revision required” or “Approved for the scope stated below.” No decision is selected in this blank template.
| Field | Entry |
|---|---|
| Decision and date | |
| Specification and artwork versions covered | |
| Sample identifiers and sizes physically reviewed | |
| Size chart scope reviewed | |
| Sizes or other items not physically reviewed | |
| Accepted exceptions and their exact scope | |
| Outstanding requirements that prevent bulk release | |
| Buyer approver and confirmation reference | |
| Manufacturer acknowledgment and reference | |
| Separate bulk release decision or record |
Size and sample approval does not certify the finished bulk batch. Confirm the other order requirements and the agreed bulk inspection separately. Keep completed sheets containing customer or order details in the project's private records; do not publish them with the blog.