CUTVANE / Buyer resources
How to Check T-Shirt Size Grading Before Bulk Production
A T-shirt sample can look right in one size while leaving important questions about the rest of the size range unanswered. Before bulk production, confirm what each size should measure, how those measurements will be checked, and which samples and specifications the approval covers.
For a streetwear brand, this review should connect the numbers to the intended silhouette. A chest measurement alone does not describe the relationship between body length, shoulder width, sleeve length and the neckline. Use a written specification and a recorded sample review to make those decisions clear.
Use the companion worksheet in four steps:
- Identify the sample and specification version in section A.
- Agree the targets, size progression and measurement methods in sections B and C.
- Record the actual sample review in sections D and E.
- Close changes and record the exact approval scope in sections F and G.
Identify the base sample and its approval status
Size grading develops a base pattern into other sizes. For the buyer, the practical starting point is a measurement specification for the base size and the intended measurements for the other sizes in the order.
Before reviewing the size range, identify the exact base sample and its specification version. Record the style reference, sample identifier, size, fabric, color and finish. Record whether the base sample is approved, requires revision or has not yet been reviewed, and state which features that decision covers. Keep any requested changes beside that record. If the sample still needs a shorter body or a different sleeve, make clear which measurements remain provisional.
Do not let an earlier approval stand in for a revised specification. A new version should show what changed and what needs another review.
Make the measurement method clear
A useful T-shirt measurement spec sheet tells both parties where each measurement starts and ends. Give each point of measurement, or POM, a reference code and a diagram or written method.
For a starting checklist, consider chest width, body length, shoulder width, sleeve length, sleeve opening, hem width, neck width and front neck drop. Adapt the list to the construction. A sleeveless style or a different sleeve construction will need different points or methods.
Use finished-garment measurements for this worksheet. Keep body measurements or wearer references in a separate fit-reference record; do not compare a body measurement directly with a finished-garment target.
Agree on these details before comparing numbers:
- The unit used throughout the sheet, such as centimeters or inches.
- Whether a width is measured flat or as a full circumference.
- The precise landmarks and measurement path, including whether trims are included.
- The garment condition and how it is positioned during measurement.
For example, do not leave “body length” open to interpretation: specify its starting point and whether the measurement is taken on the front or back. This is a method to agree, not a universal measurement instruction for every T-shirt.
Review the progression across sizes
Place the target measurements for the ordered sizes beside one another. Identify the base size, then check each adjacent size pair with the pattern maker or manufacturer. Record the agreed increment for each POM where needed, and confirm that it matches the targets in the size chart. Leave any unresolved increment open rather than assuming a standard rule.
Treat each measurement as a separate design decision. Ask how the planned changes preserve the intended boxy, cropped, oversized or other silhouette. Do not assume that every measurement should increase by the same amount or that a single percentage should be applied to the entire garment.
Keep the distinction between two decisions clear:
- Grading: the intended change between sizes.
- Tolerance: the agreed acceptable deviation from a target measurement for a particular size and POM.
Have the responsible parties confirm the grade rules and the measurement tolerances for this style. A tolerance should not be used to explain an unintended change in the size chart.
Agree which sizes need physical review
Write down which sizes and versions will be supplied for review, and who will check them. If the term “size set” is used, specify exactly which sizes it includes. Ask whether the review should include the smallest and largest ordered sizes and any sizes where the grading approach changes. Agree the scope, cost and timing before requesting additional samples.
For each sample received, record the actual measurement against the matching target. Use the same POM code in sections B, C and D of the worksheet. Match every actual sample to the same specification version, finish, measurement condition and applicable tolerance.
Alongside measurement checks, record fit observations against the agreed fit reference or wearer. Note the proportions, shoulder position, sleeve shape and neckline that need review. A photograph can help communicate a concern, but it should not replace a missing measurement record.
If only one size has been physically reviewed, state that limit. Do not mark unreceived sizes as checked.
Record finish and decoration decisions separately
Specify whether a measurement applies before or after the agreed garment finishing process. If wash performance is part of the brief, agree the test conditions, method and acceptance criteria separately, then record actual results. CottonWorks notes that product performance such as shrinkage must be measured; appearance alone does not establish it. CottonWorks garment quality control
Also review artwork dimensions and placement across the size range. Record whether the artwork stays the same size or changes for specified sizes, and define placement from agreed reference points. Do the same for labels or other details where placement matters to the design.
Do not assume that garment size grading also approves artwork scaling. Keep the artwork version and placement instructions connected to the garment specification so that each decision can be checked.
Turn the review into a clear approval record
Use the companion blank checklist for each style and specification version. Duplicate the measurement section for each actual sample; add rows for additional points or sizes. Leave unknown measurements and decisions blank until they are supplied. A blank is an open item, not a pass.
Companion worksheet: T-Shirt Size Grading and Pre-Bulk Review Checklist
Record each discrepancy with an action, a responsible person and a review date. If a change requires another sample or a revised chart, keep that item open until the agreed evidence has been reviewed. When a proposed exception is accepted, state its exact scope and record who accepted it.
Approval should identify the specification version, samples, sizes and details it covers. Size approval also needs to sit alongside the other requirements for the order, including fabric, construction, artwork, quantities and commercial arrangements. Use the broader sampling-to-bulk approval checklist to review those items. Sample approval does not certify the finished bulk batch or replace its agreed inspection.
Prepare a T-shirt brief for review
Bring together the size range, base sample or fit reference, current measurement sheet, artwork and open questions. Identify missing information so that it can be discussed before the specifications are treated as final.
Explore CUTVANE's custom T-shirt manufacturing options, then request a T-shirt project review with your design direction, intended quantities and size requirements. Use the worksheet to organize the information you have and the decisions still needed.