CUTVANE
Cross-Zipper Artwork Sample Check
Use one sheet per sample and artwork revision. Complete the targets before inspecting the garment.
Click any blank box to type. To keep a filled copy, use your browser’s Print or Save as PDF before closing.
Sample identity
Project targets
Enter the agreed values and units. Write “pending” beside any open item and name who will confirm it.
Use the wearer’s right and left. In this drawing, A is where the closed zipper centerline meets the front neckline seam. B1 (wearer’s right) and B2 (wearer’s left) mark matching points on one feature.
Photo references
Record a closed full front, a closed close-up and an open view of both fronts. Label each image with the sample and artwork revision. Enter reference IDs below.
Inspect the closed front
Closed, full front
Lay the sample flat without stretching. Check the graphic’s height and orientation against the marked front view.
Check placement and zipper movement
Closed, zipper detail
Find B1 and B2 on the same edge of the motif. Record both vertical readings from A’s level, the unit and which side sits higher, if either.
Visible zipper and blank fabric
Compare each artwork edge with the agreed side reference. Record exposed zipper separately from any blank fabric beside it.
Open, both fronts
Match each half to the open view. Check the graphic edge beside each tape for any missing or unintended marks.
Open and reclose
Operate the zipper normally. Note any catching or contact. Reclose and compare B1/B2 again.
Decision for this sample and artwork revision
Choose one after inspection. An unresolved target remains pending.